| |
|
|
Pinnacle
Design/Build’s vegetated retaining walls systems is an eco-conscious option with the qualities
of a sustainable solution where concrete non-vegetated walls are
traditionally used.
With
comparable strength and functionality of segmental block, cast-in-place
and stone filled MSE retaining walls, Pinnacle’s MSE Vegetated Slope
retaining wall system works when your site requires a retaining wall for
grade separation with
a dual function of being aesthetically pleasing
and blending into the environment.
Pinnacle Design/Build vegetated wall systems are ideal in
environmentally sensitive areas or when there is a need for
an alternative to traditional hardscapes.
Instead, Pinnacle uses reinforcing geo textile materials and/or welded
wire baskets forms which are filled with soil which can be planted with
native foliage or hydroseeded with grass. Then over time, the retaining
wall virtually disappears over time as the vegetation grows to hide the
underlying structure.
Pinnacle Design/Build’s vegetated wall systems:
-
allow/contribute to
LEED points being earned on projects
-
allow for the use
less expensive on-site infill materials which saves cost
-
have
traditionally have been counted as green space under most zoning codes,
thus allowing for more developable space per square foot of building
site
-
allows rain water to
collect through the wall fascia, maximizing storm water collection, and
minimizing runoff
-
uses less concrete
compared to traditional retaining walls, helping to reduce heat island
effects and storm water runoff while creating urban habitats
Pinnacle Design/Build -
MSE Vegetated Slopes Project Profiles
|
 |
|
Home Depot,
Villa Rica, GA
PROJECT
FACTS:
Slope
Area
= 31,000 SF;
Max Ht
= 32 FT
CHALLENGE:
Create a grade separation along the property line to support
the new store and parking lot.
SOLUTION:
Pinnacle Design/Build provided a 32 ft tall Vegetated MSE
vegetated slope as a value added alternative.
VALUE:
The Vegetated MSE vegetated slope was constructed faster and
eliminated utility conflicts with utilities adjacent to the
slope. The “green” solution allowed the very tall steepened
slope to blend into the natural surroundings.
|
|
 |
|
Westchester Commons,
Midlothian, VA
PROJECT
FACTS:
Wall
Area
= 42,000 SF;
Max Ht
= 64 FT
CHALLENGE:
The developer of this project required a large retaining
wall to prevent encroachment into a sensitive wetlands
area. The retaining wall was originally designed to be a
segmental retaining wall. Given the height, this would have
been extremely expensive. In addition, the “concrete” look
did not blend well with the surroundings.
SOLUTION:
Pinnacle Design/Build value engineered the wall into an MSE
Vegetated slope that could be constructed more rapidly and
with less expense than the original design.
VALUE:
Our solution saved the developer nearly 20 percent in wall
construction costs. In addition, the vegetated slope blends
well with the sensitive environment the it was built to
protect.
|
|
 |
|
Buffalo Bayou Bank Protection,
Houston, TX
PROJECT
FACTS:
Slope
Area
= 3,000 SF;
Max Ht
= 10.5 FT
CHALLENGE:
As part of a City of Houston Parks jogging and bike path
improvement project, retaining walls were required at new
bridge structure to be constructed over the Buffalo Bayou
drainage channel. These walls needed to provide structural
support for the bridge, protect the bank of the bayou from
erosion and fit with the natural surroundings of the park.
SOLUTION:
As part of a City of Houston Parks jogging and bike path
improvement project, retaining walls were required at new
bridge structure to be constructed over the Buffalo Bayou
drainage channel. These walls needed to provide structural
support for the bridge, protect the bank of the bayou from
erosion and fit with the natural surroundings of the park.
VALUE:
The Pinnacle Design/Build solution provided a surprisingly
cost effective and green solution that satisfied city
officials as well as park goers.
|
|
 |
|
Lenoir Business Park,
Lenoir, NC
PROJECT
FACTS:
Wall
Area
= 94,000 SF;
Max Ht
= 56 FT
CHALLENGE:
The developer of this project required nearly 100 acres of
relatively flat space to construct several buildings and
associated parking. The project, located in the hilly
region of western North Carolina was on a fast track and the
reinforced slopes were on the critical path of the project
schedule.
SOLUTION:
Pinnacle Design/Build engineered and constructed four
massive MSE Vegetated slopes that averaged over 38 feet in
height.
VALUE:
Pinnacle Design/Build was able to make engineering decisions
during the design and construction process that allowed the
grading contractors to move at an expedited pace and stay on
schedule. In addition, the vegetated slopes blended nicely
with the surrounding area and were less expensive than other
options considered.
|
|
 |
|
The Retreat at Lake Tamaha,
Tuscaloosa, AL
PROJECT
FACTS:
Wall
Area
= 28,000 SF;
Max Ht
= 21 FT
CHALLENGE:
The developer of this collegiate housing project needed to
maximize his land use for his hill side property.
SOLUTION:
Pinnacle Design/Build designed and constructed a series of
vegetated MSE Retaining Walls along the property boundaries.
VALUE:
Our solution allowed the developer to maximize his land use
with retaining walls that blended into the natural
environment of his densely forested property.
|
| |
|
|
|
You must have the Adobe
Acrobat Reader to view our brochures, newsletters, etc. You can get the
Adobe Acrobat Reader
for Free! |
|
|