Home About Pinnacle Services Project Profiles News Safety/Quality Contact Us
 
             
  Pinnacle Retaining Wall and Erosion Control Systems  

MSE Vegetated Slopes

 
 
 
n   MSE Segmental Retaining Walls (SRW)
n   MSE Berm
n   MSE Panel Walls
n   Vegetated MSE Slopes
n   Stone Faced MSE Walls
n   MSE Pressure Relief Walls
n   Cast-In-Place (CIP) Concrete Walls
n   Gravity Retaining Walls
n   Soil Nail Walls
n   Piling Walls
n   Gabion Structures
n   Above and Underground Stormwater Detention Structures
n   Composite Wall Systems
n   Retaining Wall Repair
  Similar to segmental block and stone filled MSE retaining walls, the MSE Vegetated Slope retaining wall system works when your site requires a retaining wall for grade separation.  Welded wire baskets forms are used in place of the concrete facing units.  The baskets are wrapped in a biaxial geogrid reinforcement but are filled with soil.  They can be planted with foliage or hydroseeded with grass.  This solution provides a "green" alternative to conventional retaining walls.  The retaining wall virtually disappears over time as the vegetation grows to hide the structure's baskets. 
 

Pinnacle Design/Build - MSE Vegetated Slopes Project Profiles


  Overlook Terrace Apartments, Louisville, KY
 

PROJECT FACTS:  Wall Area = 35,500 SF; Max Ht = 69 FT

 

CHALLENGE The developer of this multi-family project was faced with the challenge of maximizing the useable land for this hillside development.

 

SOLUTION A 69 ft tall MSE vegetated retaining wall was designed and constructed by Pinnacle Design/Build’s experienced construction team  to support the fills for the project’s building pads and parking.

 

VALUE The solution provided a safe and economical alternative.  The naturally grassed facing provided a “green solution” that blended into the property’s surroundings.

 


  Home Depot, Villa Rica, GA
 

PROJECT FACTS:  Slope Area = 31,000 SF; Max Ht = 32 FT

 

CHALLENGE Create a grade separation along the property line to support the new store and parking lot.

 

SOLUTION Pinnacle Design/Build provided a 32 ft tall Vegetated MSE vegetated slope as a value added alternative.

 

VALUE The Vegetated MSE vegetated slope was constructed faster and eliminated utility conflicts with utilities adjacent to the slope.  The “green” solution allowed the very tall steepened slope to blend into the natural surroundings.

 


  Westchester Commons, Midlothian, VA
 

PROJECT FACTS:  Wall Area = 42,000 SF; Max Ht =  64 FT

 

CHALLENGE The developer of this project required a large retaining wall to prevent encroachment into a sensitive wetlands area.  The retaining wall was originally designed to be a segmental retaining wall.  Given the height, this would have been extremely expensive.  In addition, the “concrete” look did not blend well with the surroundings.

 

SOLUTION Pinnacle Design/Build value engineered the wall into an MSE Vegetated slope that could be constructed more rapidly and with less expense than the original design.

 

VALUE Our solution saved the developer nearly 20 percent in wall construction costs.  In addition, the vegetated slope blends well with the sensitive environment the it was built to protect.

 


  Buffalo Bayou Bank Protection, Houston, TX

PROJECT FACTS:  Slope Area = 3,000 SF; Max Ht =  10.5 FT

 

CHALLENGE As part of a City of Houston Parks jogging and bike path improvement project, retaining walls were required at new bridge structure to be constructed over the Buffalo Bayou drainage channel.  These walls needed to provide structural support for the bridge, protect the bank of the bayou from erosion and fit with the natural surroundings of the park.

 

SOLUTION As part of a City of Houston Parks jogging and bike path improvement project, retaining walls were required at new bridge structure to be constructed over the Buffalo Bayou drainage channel.  These walls needed to provide structural support for the bridge, protect the bank of the bayou from erosion and fit with the natural surroundings of the park.

 

VALUE The Pinnacle Design/Build solution provided a surprisingly cost effective and green solution that satisfied city officials as well as park goers.


 


  Lenoir Business Park, Lenoir, NC

PROJECT FACTS:  Wall Area = 94,000 SF; Max Ht =  56 FT

 

CHALLENGE The developer of this project required nearly 100 acres of relatively flat space to construct several buildings and associated parking.  The project, located in the hilly region of western North Carolina was on a fast track and the reinforced slopes were on the critical path of the project schedule.

 

SOLUTION Pinnacle Design/Build engineered and constructed four massive MSE Vegetated slopes that averaged over 38 feet in height.

 

VALUE Pinnacle Design/Build was able to make engineering decisions during the design and construction process that allowed the grading contractors to move at an expedited pace and stay on schedule.  In addition, the vegetated slopes blended nicely with the surrounding area and were less expensive than other options considered.
 


  The Retreat at Lake Tamaha, Tuscaloosa, AL

PROJECT FACTS:  Wall Area = 28,000 SF; Max Ht =  21 FT

 

CHALLENGE The developer of this collegiate housing project needed to maximize his land use for his hill side property.

 

SOLUTION Pinnacle Design/Build designed and constructed  a series of vegetated MSE Retaining Walls along the property boundaries.

 

VALUE Our solution allowed the developer to maximize his land use with retaining walls that blended into the natural environment of his densely forested property.


 

     
You must have the Adobe Acrobat Reader to view our brochures, newsletters, etc. You can get the Adobe Acrobat Reader for Free!

 

 
     
     
     
   

 

   

 

     
 

Copyright © 2011 Pinnacle Design Build Group, Inc.   |  Site Map  |  Privacy Policy  |  Retaining Wall Systems